Super Stock Rules

This is a SPEC class. The rules define every modification or alternative part that is allowed. All other modifications and parts are NOT allowed. 

Chassis 

TRAXXAS 2wd Slash LCG Chassis, no modifications allowed Traxxas Slash HD parts are permitted Legal option parts: Traxxas aluminum shock caps; RPM bearing carriers F/R; body mount kit from McAllister, Proline, or equivalent All parts must be present and in stock location, except: receiver box and gear cover may be removed; stock front bumper may be inverted Battery brace can be trimmed to allow different LiPo battery wire configurations 

Electronics 

• Hobbywing 13.5T Justock combo

• Traxxas BL2 combo

Gear

86/90 spur gear only - open pinion

Servo 

must comply with Salvas Mudboss rules: TRX2075, optionally with Savox metal gears; SAVOX SC-0252MG Any servo horn or servo saver 

Suspension 

Stock Traxxas Slash shocks in stock locations; stock Slash springs rear, LCG springs front; any fluids; any internal limiters One blue bump stop may be used on each rear shock shaft; no front bump stops 

Battery 

Battery must comply with Salvas Mudboss rules: max 5200 mAh/50C; any connector, no bullets 

Tires 

Traxxas Slash off-road tires on Traxxas wheels; any tread and compound Same tread pattern on all four corners; main tread pattern must be visible across the width of the tire Any combination of gray and black wheel hexes; any combination of front and rear Slash wheel offset 

Body

 Molded full body stock car made for Traxxas Slash or SCT Only: McAllister, Shark or equivalent Windows must remain intact, bumpers must be present (follow cut line in rear) Maximum 1.5” rear spoiler height from deck, no end caps allowed, base of spoiler cannot hang off the rear deck

Smokey Yunick Rule: if the rules don't say you can do it, you cannot do it.