Midwest Modified Rules
10th scale 2WD off-road buggy-based carbon fiber or similar material chassis
Midwest Modified body, 1.5” maximum rear spoiler
Maximum 10.5T 2-pole 540 sensored brushless motor
ESC in binky mode or not capable of ESC timing advance
Intent
All PWR Dirt Oval Series races will run under the current rules at the time of the race. Class rules are a work in progress and will be amended as needed. First and foremost, it is the SPIRIT of these rules the completely describe what you can do in this class. If it doesn’t say you can, assume that you cannot.
Chassis
Any 1/10th scale buggy chassis or carbon fiber chassis by Custom Works, GFRP, 57 Designs, Triple P, etc.
Mid and Rear Motor chassis allowed, chassis may be special cut type oval chassis
Added weight must be inside the chassis rails, not on the side or under the chassis
Suspension
Independent suspension only
Aftermarket shocks and springs allowed
Limiting of shocks is allowed inside the shock
May change shock oil, shock pistons and springs
Springs: can be from any manufacturer, not OEM specific
Adjustable rear A arms are allowed
Aluminum Hub carriers are approved for competition front and rear
Brass inserts in the front and rear arms are allowed, any weight tungsten allowed on or inside chassis rail
Transmission
Mid or rear motor chassis with single speed transmissions only
May use gear or ball differentials
Drivetrain upgrades allowed (MIP, Proline, Slipper Eliminators allowed)
Any spur gear or pinion ration combination is allowed
Electronics
Electronics can be mounted on the left or right within main chassis plate only
Any 10.5T or higher wind 540-sized 2-pole open turn brushless motor is legal, sensored with any timing setting, cooling fans allowed
Any type of ESC, must be in blinky mode or not capable of timing advance
Battery
7.4V or 7.6 LiHv / 2S LiPo Batteries, maximum charge voltage 8.60V
Battery must be mounted on right, left or centerline of chassis, laydown or standup position allowed
Any multi-channel radio system and steering servo is allowed
Steering servo may be center, left or right mounted on chassis
No AVC, GYRO or additional traction control devices allowed
Tires
Rubber Tires Only, any compound or combination is allowed
PWR will be open tire rule for Midwest Modified, must use 2.2” tires and wheels
Body
For body rules see www.dirtoval.com
For Midwest body dimensions see: https://www.dirtoval.com/Portals/1/rules/DODC_rules_10-21_MWM.pdf?ver=2021-12-28-152120-620
Under body supports may be added to brace each rear quarter panels, must hold it in stock position, cannot be flared out
Spoiler
Spoiler maximum length: 1.5" including a max .250” wicker
Spoiler cannot be wider than center panel
No more than (2) spoiler center braces allowed
Center braces can be no larger than optional spoiler end caps.
End Caps cannot extend past end of side panel by more than .750” (Included in the Max Length of Body)
End Cap Size: Length 2.75" Height 1.5"
Height is area of End Cap above the rear deck.